Complete Set COM/NAV1/NAV2/ADF/XPDR of Radios in the
older Collins Style + Slave DME´s .
HGHB_DME_1 and HGHB_DME_2 are fully working freeware
The full version including the dual DME is available on our
website.
V 1.0
by HGHB Virtual Instruments
(Harald Geier & Helmut Busch , Hof , Germany )
Programmed using Microsoft Visual C++ 5.0 Enterprise Edition and the Panel SDK
Our gauges are either freeware, or payware
If included in your own panels that you use yourself , they are FREE
( ONLY THE FREEWARE VERSIONS )
if you want to include them into Panels you sell as ANY sort of payware,
you have to pay a small fee to us for the right to use them.
Installing this gauge :
copy the .gau file(s) to the gauges directory of FS98
include the gauge into the appropriate panel.cfg you wish
I assume a basic knowledge of panel design here.
Usage and description
COM1 : You can change the active frequency as usual at the frequency readout
You can also dial at the button up/down thru the full range
Clicking in the middle of the button switches the increment value to
25 Kc , but only for the button up/down function.
The standard changing on the readout will still use the settings from
the preferences.
Change the standby frequency at the readout, here the knob in/out also
changes 50/25 kc. It is possible to dial a 25kc frequency also if the
preferences are set for 50kc.
NAV1/2: Change the active frequency as usual at the readout, or with full range
tuning at the knob. Also you may change the standby frequency at the
readout.
ADF : Change the active frequency as usual at the readout, or with full range
tuning at the knob. Also you may change the standby frequency at the
readout. In addition to the standard you may not only increase but also
decrease any number. At the Standy frequency yaou can also change the
1000 and the decinal number, when 100hz ADF is active from the prefs.
The extended ADF functionalities are ONLY available when the FS-Patch
( FSPATCH1.EXE ) from Microsoft is installed. On other Systems only
the standard functions of the ADF are working !
XPDR :The full version also allows the decrease every digit with mouse clicks,
below the increment positions. This feature is disabled in the free version.
DME :The free DME´s are bound to NAV1 or NAV2 and can also be used together.
The dual DME, found in the payware archive only, shows both NAV1 and NAV2
at the same time.
Comments :
The pay version is available at 15$
on our website :
http://www.hof.baynet.de/~ho3080
We work on much more other gauges .......
Also, we published several other gauges before
Disclaimer:
The work used here is copyrighted material. The files may not be altered
in any way. If you want to to so, for any work you give away, either as
freeware or payware, you need our written compliance.
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
If you want to use our work in any freeware panels, there is no fee. The
only restriction is, that you have to e-mail the panel to me , BEFORE
posting it anywhere. I will check the panel, and if i judge it as good
work, i will allow you to use the gauge for free.
This Readme file has to be included in every panel where the gauges
are used. Also the protected payware archive, or a reference where
to find it on the web has to be part of the panel documentation
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
If you like to use the gauges in a panel that will be shareware or any
other payware, you have to pay a small fee for using it. For pricing and
possible modifications, e-mail us.
INCLUDING HGHB GAUGES IN SAMPLER CD´S
If any of our gauges, either solely or as a part of a panel is to be included
in any sampler on CD or other media for sale, the following applies :
**************************************************************************
The publisher of the media including any of our work, needs the written
compliance from us. If we did not grant the right to publish the gauges,
this will be treated as software piracy.
**************************************************************************
These files will not harm your computer in any way. Nevertheless i cannot
guarantee for functionality in all case of it's use. It was tested with
some panels in 3D mode, without problems.
If you have any comments or suggestions , feel free to e-mail them to me:
H.GEIER@hof.baynet.de
Harry Geier, Helmut Busch
12 Jan. 1998
We also like to thank Microsoft for giving us the SDK and all other Programmers
who inspired us
See our Webpage also for other gauges: www.hof.baynet.de/~ho3080
Send a BANKNOTE to our adress , if you want to get the password by Mail
or Fax, include 1$ for return postage.
If you want to receive the password via E-Mail, send the 10$ only.
Inside Europe:
Send DM Banknotes or Eurocheque to receive your password in either way.
Return Postage not needed.
You can send me an E-Mail in forth to immediately get your password.
( If i don´t receive any money from you , this was the last password you got
from me ).
It might be possible that this registration password will enable more
future gauges.
Adress :
Harald Geier
HGHB Virtual Instruments
Ringsiedlung 60
95145 Oberkotzau
Germany
Alternate adress for sending banknotes to:
HGHB USA
149 Winnacunnet Rd.
Hampton, NH
03842
(Registration password via E-Mail )
We can not accept anything else than banknotes
( US-Dollars, Pound Sterling, DM )
or EUROCHEQUES in DM currency
Alternate registration via SWREG :
If you have access to SWREG on Compuserve you may also use that service.
Register my FS95 Future Panel (10$)
SWREG Number : 15193
with as many copies as needed to fit the value of the gauges to register
By e-mail you can tell us which gauges you wanted, and we will send you
the unlock-codes.
